Find a Service Center
- Size 1216
- 1.5:1 Ratio
- Double, Left - Counter Clockwise/Rear - Clockwise, Left & Rear Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Bearing Type | Roller Bearing |
| Assembly | L |
| Relative Shaft Rotation | Left - Counter Clockwise, Rear - Clockwise |
| Output RPM @ 1750 rpm Input | 1167 rpm |
| Washdown Duty | No |
| Torque Out @ 1750 rpm | 712 in lb |
| Output Configuration | Double |
| Box Length | 9 in |
| Output (Shaft or Bore) Size | 1 in |
| Box Width | 7 in |
| Input Shaft Position | Facing You |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Relation to Base | No Base |
| Box Height | 4 1/8 in |
| Input Configuration | Shaft Input |
| Gear Style | Bevel |
| Shaft Arrangement | #34 |
| Torque Out @ 1150 rpm | 785 in lb |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Output Shaft Position | Left & Rear |
| Input (Shaft or Bore) Size | 1 in |
| Input Relation to Base | No Base |
| Ratio | 1.5:1 |
| Unit Size | 1216 |
| Weight | 24.002 LB |
| EAN or UPC | 781711611173 |
