Find a Service Center
- Size 1216
- 1.35:1 Ratio
- Double, Left - Clockwise/Rear - Clockwise, Left & Rear Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Gear Style | Bevel |
| Bearing Type | Roller Bearing |
| Box Height | 4 1/8 in |
| Box Length | 9 in |
| Input Relation to Base | No Base |
| Box Width | 7 in |
| Output Relation to Base | No Base |
| Output RPM @ 1750 rpm Input | 1296 rpm |
| Washdown Duty | No |
| Input Shaft Position | Facing You |
| Torque Out @ 1150 rpm | 776 in lb |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Output Shaft Position | Left & Rear |
| Relative Shaft Rotation | Left - Clockwise, Rear - Clockwise |
| Output Configuration | Double |
| Shaft Arrangement | #32 |
| Torque Out @ 1750 rpm | 703 in lb |
| Output (Shaft or Bore) Size | 1 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Ratio | 1.35:1 |
| Assembly | K |
| Input (Shaft or Bore) Size | 1 in |
| Unit Size | 1216 |
| Input Configuration | Shaft Input |
| Weight | 24.002 LB |
| EAN or UPC | 781711611135 |
