Find a Service Center
Alternate Products
- Reborable Cast Iron Gear
- 4 Diametral Pitch
- 14.5° Pressure Angle
- 42 Teeth
- 10 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Material | Cast Iron |
| Torque at 1800 RPM | N/A |
| Bore Type | Reborable |
| Set Screw | No |
| Torque at 200 RPM | 5575 lb/in |
| Torque at 300 RPM | 4672 lb/in |
| Origin | Reborable |
| Hub Dia. | 4 in |
| Diametral Pitch | 4 |
| Torque at 1200 RPM | N/A |
| Pitch Diameter | 10.5 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 600 RPM | 2849 lb/in |
| No. of Teeth | 42 |
| Length Through Bore | 3.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 900 RPM | N/A |
| Outside Dia. | 11 in |
| Bore Size | 1.25 in |
| Pressure Angle | 14.5 ° |
| Weight | 32.251 LB |
| EAN or UPC | 781711104965 |
