Find a Service Center
Alternate Products
- Finished Steel Gear
- 8 Diametral Pitch
- 14.5° Pressure Angle
- 16 Teeth
- 2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Keyway | w/Setscrew |
| Torque at 300 RPM | 630 lb/in |
| Diametral Pitch | 8 |
| Bore Size | 0.875 in |
| No. of Teeth | 16 |
| Length Through Bore | 2 in |
| Hub Dia. | 1.55 in |
| Torque at 600 RPM | 522 lb/in |
| Torque at 1800 RPM | 309 lb/in |
| Outside Dia. | 2.25 in |
| Pitch Diameter | 2 in |
| Material | Steel |
| Bore Type | Finished |
| Set Screw | Yes |
| Torque at 900 RPM | 445 lb/in |
| Pressure Angle | 14.5 ° |
| Origin | Finished Bore |
| Torque at 1200 RPM | 388 lb/in |
| Torque at 200 RPM | 677 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw Size | 7/8 |
| Weight | 1.201 LB |
| EAN or UPC | 781711460979 |
