Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 14.5° Pressure Angle
- 24 Teeth
- 2.400" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Set Screw | Yes |
| No. of Teeth | 24 |
| Pressure Angle | 14.5 ° |
| Torque at 300 RPM | 545 lb/in |
| Pitch Diameter | 2.4 in |
| Bore Type | Finished |
| Torque at 1800 RPM | 248 lb/in |
| Outside Dia. | 2.6 in |
| Keyway | w/Setscrew |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 1200 RPM | 317 lb/in |
| Torque at 200 RPM | 592 lb/in |
| Bore Size | 0.875 in |
| Material | Steel |
| Hub Dia. | 2.02 in |
| Set Screw Size | 7/8 |
| Origin | Finished Bore |
| Diametral Pitch | 10 |
| Torque at 900 RPM | 369 lb/in |
| Torque at 600 RPM | 440 lb/in |
| Length Through Bore | 1.62 in |
| Weight | 1.701 LB |
| EAN or UPC | 781711460917 |
