Find a Service Center
Alternate Products
- Finished Steel Gear
- 20 Diametral Pitch
- 14.5° Pressure Angle
- 28 Teeth
- 1.400" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Parallel shaft applications
- Reliability from steel, cast iron and brass
- Base oil viscosity: 500 SUS @ 100 °F
| Diametral Pitch | 20 |
| Pitch Diameter | 1.4 in |
| Set Screw | Yes |
| Torque at 1800 RPM | 39.2 lb/in |
| Torque at 300 RPM | 69.7 lb/in |
| Origin | Finished Bore |
| No. of Teeth | 28 |
| Outside Dia. | 1.5 in |
| Set Screw Size | 3/8 |
| Keyway | w/Setscrew |
| Pressure Angle | 14.5 ° |
| Material | Steel |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 900 RPM | 53.2 lb/in |
| Bore Size | 0.375 in |
| Torque at 1200 RPM | 47.5 lb/in |
| Torque at 200 RPM | 73.4 lb/in |
| Torque at 600 RPM | 60.3 lb/in |
| Bore Type | Finished |
| Hub Dia. | 1 1/8 in |
| Length Through Bore | 0.75 in |
| Weight | 0.221 LB |
| EAN or UPC | 781711460153 |
