Find a Service Center
Alternate Products
- Finished Steel Gear
- 20 Diametral Pitch
- 14.5° Pressure Angle
- 25 Teeth
- 1 1/4" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Parallel shaft applications
- Reliability from steel, cast iron and brass
- Four ball wear test 40 kg: 63 mm
| Set Screw Size | 3/8 |
| Material | Steel |
| Origin | Finished Bore |
| Hub Dia. | 0.97 in |
| Set Screw | Yes |
| Torque at 900 RPM | 47.9 lb/in |
| Length Through Bore | 0.75 in |
| Torque at 300 RPM | 61.4 lb/in |
| Torque at 1200 RPM | 43.1 lb/in |
| Torque at 200 RPM | 64.4 lb/in |
| Bore Type | Finished |
| Pitch Diameter | 1.25 in |
| Bore Size | 0.375 in |
| Pressure Angle | 14.5 ° |
| Keyway | w/Setscrew |
| Diametral Pitch | 20 |
| Torque at 1800 RPM | 36 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 600 RPM | 53.8 lb/in |
| Outside Dia. | 1.35 in |
| No. of Teeth | 25 |
| Weight | 0.211 LB |
| EAN or UPC | 781711460139 |
