Find a Service Center
- 2 5/8" Center Distance
- 60:1 Ratio
- 56C Frame
- C-Face Quilled Input
- Hollow Output
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Output (Shaft or Bore) Size | 1 in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Ratio | 60:1 |
| Output Torque @ RPM | 1385 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Washdown Duty | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Lubrication | None |
| Input Configuration | C-Face Quilled |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Box Length | 7 3/8 in |
| Reduction Type | Single Reduction |
| Base to Centerline of Output Shaft | 2 7/16 in |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Shaft Assembly Code | H |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Motor HP | 3/4 hp |
| Input (Shaft or Bore) Size | 5/8 in |
| Fan Cooled | No |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Keyway Size | 3/16 x 3/32 |
| Family Name | HF |
| Use With | 726 |
| Box Height | 8 in |
| Torque Out @ 1750 rpm | 1385 in lb |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Torque Out @ 1150 rpm | 1390 in lb |
| Frame Size | 56C |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Motor Application | General Purpose |
| Box Width | 5 21/64 in |
| Max. Input HP @ 100 rpm | 0.1 hp |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Center Distance | 2 5/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Output Configuration | Hollow Output |
| Bore Code | B5 |
| Frame | 56C |
| Input HP @ RPM | 0.64 hp @ 1150 rpm, 0.89 hp @ 1750 rpm |
| Worm Position | Universal |
| Weight | 45.1 LB |
| EAN or UPC | 781711630815 |
