Skip to content Skip to navigation menu
Boston GearHF721-60-B5-H-P20

HF721-60-B5-H-P20

700 Series Bostmount C-Face Quilled Reducer
Item #101795385
  • 2 1/16" Center Distance
  • 20:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Hollow Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
Boston GearHF721-60-B5-H-P20
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 1/16" Center Distance
  • 20:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Hollow Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Torque Out @ 1750 rpm 892 in lb
Motor HP 0.5 hp
Housing Material Cast Iron
Output (Shaft or Bore) Size 1 1/4 in
Output RPM @ 1750 rpm Input 87.5 rpm
Output Torque @ RPM 782 in lb @ 1150 rpm, 892 in lb @ 1750 rpm
Base to Shaft Center Height w/Low Vert. Base Kit 3.13 in
Bolt Centers w/ Vertical "J" Base Kit (in) 8.63 x 2.63
Frame Size 56C
Base to Centerline of Output Shaft 2 9/32 in
Bolt Centers w/ Std. Base Kit (in) 6 3/8 x 4 11/16
Base to Shaft Center Height w/Std. Base Kit 4.81 in
Worm Position Universal
Center Distance 2.0625 in
Output RPM @ Input RPM 88 rpm @ 1750 rpm
Family Name HF
Torque Out @ 1150 rpm 782 in lb
Max. Overhung Load @ RPM 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm
Bolt Centers w/ Vertical Base Kits (in) 8 3/8 x 4 7/8
Lubrication None
Ratio 20:1
Output Configuration Hollow Output
Input (Shaft or Bore) Size 5/8 in
Input HP @ RPM 0.86 hp @ 1150 rpm, 1.4 hp @ 1750 rpm
Bolt Center 5 in x 2 7/8 in
Max. Input HP @ 100 rpm 0.11 hp
Thermal Input Horsepower @ 1750 RPM N/A
Box Length 6 in
Bolt Center Length x Bolt Center Width 5 in x 2 7/8 in
Frame 56C
Use With 721
Fan Cooled No
Max. Thrust Load @ 1150 rpm 700 lb/in
Motor Application General Purpose
Input Configuration C-Face Quilled
Box Height 6 3/8 in
Shaft Assembly Code H
Max. Overhung Load @ 1750 rpm 700 lb/in
Keyway Size 3/16 x 3/32
Max. Thrust Load @ RPM 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm
Reduction Type Single Reduction
HP @ RPM 1 hp @ 1800 rpm
Washdown Duty No
Bore Code B5
Box Width 4 45/64 in
Base to Centerline of Input Shaft 4 11/32 in
Base to Shaft Center Height w/Vert. "J" Base Kit 3.94 in
Base to Shaft Center Height w/High Vert. Base Kit 4.88 in
Weight 26.1 LB
EAN or UPC 781711630556
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison