FWC721-100-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101882853

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Base to Centerline of Input Shaft	N/A
Lubrication	None
Bore Code	B5
Reduction Type	Double Reduction
Max. Overhung Load @ 1750 rpm	700 lb/in
Bolt Centers w/ Vertical Base Kits (in)	8 3/8 x 4 7/8
Thermal Input Horsepower @ 1750 RPM	N/A
Center Distance	2.0625 in
Box Height	6 25/64 in
Torque Out @ 1750 rpm	910 in lb
Torque Out @ 1150 rpm	N/A
Family Name	FWC
Motor HP	0.5 hp
Keyway Size	3/16 x 3/32
Bolt Centers w/ Std. Base Kit (in)	6 3/8 x 4 11/16
Base to Centerline of Output Shaft	2 9/32 in
Box Width	9 55/64 in
Box Length	5 13/64 in
Ratio	100:1
Max. Thrust Load @ 1150 rpm	700 lb/in
Bolt Centers w/ Vertical "J" Base Kit (in)	8.63 x 2.63
Input Configuration	C-Face Quilled
Housing Material	Cast Iron
Output Configuration	Left Output
Fan Cooled	No
Input (Shaft or Bore) Size	5/8 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.13 in
Worm Position	Universal¦Right Angle
Frame Size	56C
Output RPM @ 1750 rpm Input	17.5 rpm
Shaft Assembly Code	G
Frame	56C
Bolt Center	5 in x 2 7/8 in
Base to Shaft Center Height w/High Vert. Base Kit	4.88 in
Output (Shaft or Bore) Size	1 in
Washdown Duty	No
Base to Shaft Center Height w/Vert. "J" Base Kit	3.94 in
HP @ RPM	0.5 hp @ 1800 rpm
Base to Shaft Center Height w/Std. Base Kit	4.81 in
Motor Application	General Purpose
Weight	35.1 LB
EAN or UPC	781711524428