FWC718-200-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101882852

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Reduction Type	Double Reduction
Bolt Center	4 3/16 in x 2 3/4 in
Center Distance	1.75 in
Motor Application	General Purpose
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Fan Cooled	No
Input (Shaft or Bore) Size	5/8 in
Family Name	FWC
HP @ RPM	0.25 hp @ 1800 rpm
Output Configuration	Left Output
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Base to Centerline of Output Shaft	2 1/16 in
Bore Code	B5
Box Length	5 1/16 in
Torque Out @ 1150 rpm	N/A
Shaft Assembly Code	G
Frame Size	56C
Thermal Input Horsepower @ 1750 RPM	N/A
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Box Width	8 7/8 in
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Output (Shaft or Bore) Size	7/8 in
Ratio	200:1
Base to Centerline of Input Shaft	N/A
Housing Material	Cast Iron
Motor HP	0.25 hp
Worm Position	Universal¦Right Angle
Frame	56C
Washdown Duty	No
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Max. Thrust Load @ 1150 rpm	500 lb/in
Max. Overhung Load @ 1750 rpm	500 lb/in
Input Configuration	C-Face Quilled
Torque Out @ 1750 rpm	660 in lb
Box Height	5 3/4 in
Output RPM @ 1750 rpm Input	8.75 rpm
Lubrication	None
Keyway Size	3/16 x 3/32
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Weight	26.1 LB
EAN or UPC	781711525494