Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F738-50F-B7-G

700 Series C-Face Quilled Reducer
Item #101916506
  • 3 3/4" Center Distance
  • 50:1 Ratio
  • 140TC or 180C Frame
  • w/Fan
  • C-Face Quilled Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3 3/4" Center Distance
  • 50:1 Ratio
  • 140TC or 180C Frame
  • w/Fan
  • C-Face Quilled Input

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Base to Shaft Center Height w/High Vert. Base Kit 7 in
Washdown Duty No
Shaft Assembly Code G
Bolt Centers w/ Vertical Base Kits (in) 13.94 x 8.00
Base to Shaft Center Height w/Std. Base Kit 7 1/2 in
Torque Out @ 1150 rpm 4000 in lb
Output Torque @ RPM 3626 in lb @ 1750 rpm, 4000 in lb @ 1150 rpm
Keyway Size 3/16 x 3/32
Base to Shaft Center Height w/Low Vert. Base Kit 5 1/4 in
Base to Centerline of Output Shaft 3 7/8 in
Box Length 10 in
Max. Overhung Load @ 1750 rpm 2000 lb/in
Output RPM @ 1750 rpm Input 35 rpm
Max. Thrust Load @ 1150 rpm 1300 lb/in
Max. Thrust Load @ RPM 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm
Torque Out @ 1750 rpm 3626 in lb
Box Height 10 7/16 in
Input Configuration C-Face Quilled
Bolt Centers w/ Std. Base Kit (in) 10 3/8 x 7
Housing Material Cast Iron
Motor Application General Purpose
Center Distance 3 3/4 in
Fan Cooled Yes
Bore Code B7
Lubrication None
Frame Size 140TC, 180C
Box Width 8 3/8 in
Base to Centerline of Input Shaft 7 5/8 in
Frame 140TC, 180C
Ratio 50:1
Input HP @ RPM 1.96 hp @ 1150 rpm, 2.71 hp @ 1750 rpm
Output RPM @ Input RPM 35 rpm @ 1750 rpm
Motor HP 2 hp
HP @ RPM 3 hp @ 1800 rpm
Output (Shaft or Bore) Size 1 5/8 in
Max. Overhung Load @ RPM 2000 lb/in @ 1150 rpm, 2000 lb/in @ 1750 rpm
Max. Input HP @ 100 rpm 0.25 hp
Installed Options Fan
Input (Shaft or Bore) Size 7/8 in
Worm Position Universal
Thermal Input Horsepower @ 1750 RPM N/A
Reduction Type Single Reduction
Family Name F
Output Configuration Left Output
Bolt Center 8 1/2 in x 4 3/4 in
Weight 86.1 LB
EAN or UPC 781711535011
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison