Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F732-60E-B5-H

700 Series C-Face Quilled Reducer
Item #101869865
  • 3 1/4" Center Distance
  • 60:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left & Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3 1/4" Center Distance
  • 60:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left & Right Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Only the end user or a qualified underwriter is to identify and select the proper class, group, division and temperature code motor to meet the requirements of each installation
  • Service center personnel can advise what listings and approvals motors carry, but cannot evaluate nor recommend what motors may be suitable for use in hazardous environments
Max. Thrust Load @ 1150 rpm 1100 lb/in
Output Torque @ RPM 2281 in lb @ 1750 rpm, 2300 in lb @ 1150 rpm
Reduction Type Single Reduction
Box Height 9 3/8 in
Output (Shaft or Bore) Size 1 3/8 in
Keyway Size 3/16 x 3/32
Frame Size 56C
Input HP @ RPM 1.05 hp @ 1150 rpm, 1.4 hp @ 1750 rpm
Washdown Duty No
Output RPM @ 1750 rpm Input 29 rpm
Output RPM @ Input RPM 29 rpm @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit 6 3/4 in
Housing Material Cast Iron
Bolt Centers w/ Std. Base Kit (in) 9 1/2 x 6 1/8
Output Configuration Left & Right Output
Bolt Centers w/ Vertical Base Kits (in) 11.88 x 6.13
Center Distance 3 1/4 in
Base to Shaft Center Height w/High Vert. Base Kit 6 1/4 in
Max. Input HP @ 100 rpm 0.16 hp
Torque Out @ 1750 rpm 2281 in lb
Max. Overhung Load @ 1750 rpm 1300 lb/in
Frame 56C
Fan Cooled No
Input Configuration C-Face Quilled
Thermal Input Horsepower @ 1750 RPM N/A
Lubrication None
Bolt Center 7 1/2 in x 4 in
HP @ RPM 1.5 hp @ 1800 rpm
Input (Shaft or Bore) Size 5/8 in
Family Name F
Max. Thrust Load @ RPM 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm
Base to Centerline of Input Shaft 6 3/4 in
Motor HP 3/4 hp
Box Width 7 9/16 in
Ratio 60:1
Motor Application General Purpose
Box Length 9 in
Worm Position Universal
Bore Code B5
Torque Out @ 1150 rpm 2300 in lb
Max. Overhung Load @ RPM 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm
Base to Shaft Center Height w/Low Vert. Base Kit 4 11/16 in
Shaft Assembly Code H
Base to Centerline of Output Shaft 3 1/2 in
Use With 732
Weight 66.1 LB
EAN or UPC 781711520819
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison