Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F732-30F-B7-G

700 Series C-Face Quilled Reducer
Item #101870987
  • 3 1/4" Center Distance
  • 30:1 Ratio
  • 140TC or 180C Frame
  • w/Fan
  • C-Face Quilled Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3 1/4" Center Distance
  • 30:1 Ratio
  • 140TC or 180C Frame
  • w/Fan
  • C-Face Quilled Input

features

  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Internal baffles ensure positive, leak-free venting
  • Housing is straddle milled top and bottom for precise alignment
  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Base to Shaft Center Height w/Low Vert. Base Kit 4.69 in
Torque Out @ 1750 rpm 2902 in lb
Output (Shaft or Bore) Size 1 3/8 in
Box Height 9 3/8 in
Washdown Duty No
Fan Cooled Yes
Motor HP 2 hp
Keyway Size 3/16 x 3/32
Bore Code B7
Input HP @ RPM 2.36 hp @ 1150 rpm, 3.3 hp @ 1750 rpm
Output Configuration Left Output
Motor Application General Purpose
Bolt Centers w/ Std. Base Kit (in) 9 1/2 x 6 1/8
Installed Options Fan
Lubrication None
Base to Centerline of Output Shaft 3 1/2 in
Housing Material Cast Iron
Ratio 30:1
Max. Overhung Load @ 1750 rpm 1300 lb/in
Base to Centerline of Input Shaft 6 3/4 in
Max. Thrust Load @ 1150 rpm 1100 lb/in
Output Torque @ RPM 2902 in lb @ 1750 rpm, 3100 in lb @ 1150 rpm
Box Length 9 in
Box Width 7 9/16 in
Input (Shaft or Bore) Size 7/8 in
Thermal Input Horsepower @ 1750 RPM N/A
Use With 732
Bolt Center 7 1/2 in x 4 in
HP @ RPM 3 hp @ 1800 rpm
Output RPM @ Input RPM 58 rpm @ 1750 rpm
Max. Thrust Load @ RPM 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit 6 3/4 in
Worm Position Universal
Frame 140TC, 180C
Max. Input HP @ 100 rpm 0.3 hp
Bolt Centers w/ Vertical Base Kits (in) 11.88 x 6.13
Shaft Assembly Code G
Frame Size 140TC, 180C
Base to Shaft Center Height w/High Vert. Base Kit 6 1/4 in
Reduction Type Single Reduction
Family Name F
Input Configuration C-Face Quilled
Output RPM @ 1750 rpm Input 58.33 rpm
Center Distance 3 1/4 in
Max. Overhung Load @ RPM 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm
Torque Out @ 1150 rpm 3100 in lb
Weight 66.1 LB
EAN or UPC 781711533574
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison