Find a Service Center
- 3" Center Distance
- 15:1 Ratio
- C-Face Quilled
- Right Output
- 140TC/180C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Polycarbonate bowls are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, or temperatures outside of the rated range. As with most plastic, some chemica
| Output Configuration | Right Output |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Torque Out @ 1150 rpm | 2425 in lb |
| Reduction Type | Single Reduction |
| Family Name | F |
| Fan Cooled | No |
| Ratio | 15:1 |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Frame Size | 140TC, 180C |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Center Distance | 3 in |
| Box Length | 8 1/8 in |
| Motor Application | General Purpose |
| Frame | 140TC, 180C |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Box Width | 6 49/64 in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Torque Out @ 1750 rpm | 1969 in lb |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Lubrication | None |
| Bolt Center | 7 in x 4 in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Housing Material | Cast Iron |
| Box Height | 8 7/8 in |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Use With | 730 |
| Washdown Duty | No |
| Weight | 55.1 LB |
| EAN or UPC | 781711606902 |
