Find a Service Center
- 3" Center Distance
- 10:1 Ratio
- C-Face Quilled
- Left & Right Output
- 140TC/180C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Base to Centerline of Output Shaft | 3 1/4 in |
| Torque Out @ 1150 rpm | 2107 in lb |
| Motor Application | General Purpose |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Washdown Duty | No |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Box Width | 6 49/64 in |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Ratio | 10:1 |
| Worm Position | Universal |
| Family Name | F |
| Bolt Center | 7 in x 4 in |
| Input Configuration | C-Face Quilled |
| Frame Size | 140TC, 180C |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Torque Out @ 1750 rpm | 1787 in lb |
| Frame | 140TC, 180C |
| Center Distance | 3 in |
| Lubrication | None |
| Box Length | 8 1/8 in |
| Box Height | 8 7/8 in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Input (Shaft or Bore) Size | 7/8 in |
| Fan Cooled | No |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Output Torque @ RPM | 1787 in lb @ 1750 rpm, 2107 in lb @ 1150 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Housing Material | Cast Iron |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Reduction Type | Single Reduction |
| HP @ RPM | 5 hp @ 1800 rpm |
| Input HP @ RPM | 4.25 hp @ 1150 rpm, 5.28 hp @ 1750 rpm |
| Use With | 730 |
| Output Configuration | Left & Right Output |
| Weight | 55.1 LB |
| EAN or UPC | 781711607312 |
