Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F726-40-B7-H

700 Series C-Face Quilled Reducer
Item #101872107
  • 2 5/8" Center Distance
  • 40:1 Ratio
  • 140TC or 180C Frame
  • C-Face Quilled Input
  • Left & Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 5/8" Center Distance
  • 40:1 Ratio
  • 140TC or 180C Frame
  • C-Face Quilled Input
  • Left & Right Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Output (Shaft or Bore) Size 1 1/8 in
Bolt Centers w/ Vertical "J" Base Kit (in) 10.38 x 3.13
Output Torque @ RPM 1500 in lb @ 1150 rpm, 1512 in lb @ 1750 rpm
Box Length 7 3/8 in
Ratio 40:1
Torque Out @ 1150 rpm 1500 in lb
Input HP @ RPM 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 8 x 5 1/4
Max. Overhung Load @ RPM 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm
Box Width 5.9 in
Base to Centerline of Input Shaft 5 9/16 in
Bolt Centers w/ Vertical Base Kits (in) 10.13 x 5.75
Use With 726
Motor Application General Purpose
Base to Shaft Center Height w/Vert. "J" Base Kit 4.75 in
Output Configuration Left & Right Output
Center Distance 2 5/8 in
Frame Size 140TC, 180C
Output RPM @ Input RPM 44 rpm @ 1750 rpm
Reduction Type Single Reduction
Base to Shaft Center Height w/High Vert. Base Kit 5.59 in
Washdown Duty No
Base to Shaft Center Height w/Std. Base Kit 5.81 in
Family Name F
Box Height 8 in
Base to Shaft Center Height w/Low Vert. Base Kit 3.63 in
Input Configuration C-Face Quilled
Shaft Assembly Code H
Fan Cooled No
Worm Position Universal
Lubrication None
Max. Thrust Load @ RPM 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Max. Overhung Load @ 1750 rpm 1000 lb/in
Bore Code B7
Thermal Input Horsepower @ 1750 RPM N/A
Torque Out @ 1750 rpm 1512 in lb
Max. Thrust Load @ 1150 rpm 900 lb/in
Base to Centerline of Output Shaft 2 15/16 in
Max. Input HP @ 100 rpm 0.14 hp
Frame 140TC, 180C
HP @ RPM 1 hp @ 1800 rpm
Bolt Center 6 3/8 in x 3 3/8 in
Housing Material Cast Iron
Output RPM @ 1750 rpm Input 44 rpm
Input (Shaft or Bore) Size 7/8 in
Weight 41.1 LB
EAN or UPC 781711529515
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison