Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F724-10-B7-J

700 Series C-Face Quilled Reducer
Item #101809378
  • 2 3/8" Center Distance
  • 10:1 Ratio
  • 140TC or 180C Frame
  • C-Face Quilled Input
  • Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 3/8" Center Distance
  • 10:1 Ratio
  • 140TC or 180C Frame
  • C-Face Quilled Input
  • Right Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Base to Centerline of Output Shaft 2 1/2 in
Max. Thrust Load @ RPM 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Box Width 5 7/16 in
Keyway Size 3/16 x 3/32
Box Height 6 15/16 in
Max. Overhung Load @ RPM 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Input (Shaft or Bore) Size 7/8 in
Max. Overhung Load @ 1750 rpm 900 lb/in
Ratio 10:1
Input Configuration C-Face Quilled
Frame 140TC, 180C
Torque Out @ 1150 rpm 1025 in lb
Output (Shaft or Bore) Size 1 1/8 in
Use With 724
Bolt Centers w/ Std. Base Kit (in) 7 1/16 x 4 7/8
Motor HP 2 hp
Output Configuration Right Output
Input HP @ RPM 2.09 hp @ 1150 rpm, 3.18 hp @ 1750 rpm
Frame Size 140TC, 180C
Fan Cooled No
Base to Shaft Center Height w/High Vert. Base Kit 5 1/4 in
Worm Position Universal
Torque Out @ 1750 rpm 1069 in lb
Output RPM @ Input RPM 175 rpm @ 1750 rpm
Housing Material Cast Iron
Washdown Duty No
HP @ RPM 3 hp @ 1800 rpm
Box Length 6 3/8 in
Lubrication None
Base to Shaft Center Height w/Std. Base Kit 5.19 in
Bolt Center Length x Bolt Center Width 5 in x 2 7/8 in
Bore Code B7
Motor Application General Purpose
Reduction Type Single Reduction
Center Distance 2 3/8 in
Family Name F
Base to Shaft Center Height w/Vert. "J" Base Kit 4.06 in
Max. Thrust Load @ 1150 rpm 900 lb/in
Max. Input HP @ 100 rpm 0.27 hp
Output RPM @ 1750 rpm Input 175 rpm
Shaft Assembly Code J
Base to Shaft Center Height w/Low Vert. Base Kit 3.38 in
Output Torque @ RPM 1025 in lb @ 1150 rpm, 1069 in lb @ 1750 rpm
Bolt Centers w/ Vertical Base Kits (in) 8.94 x 4.88
Bolt Centers w/ Vertical "J" Base Kit (in) 9.19 x 2.88
Base to Centerline of Input Shaft 4 7/8 in
Thermal Input Horsepower @ 1750 RPM N/A
Bolt Center 5 in x 2 7/8 in
Weight 30.1 LB
EAN or UPC 781711519868
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison