Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F718-25-B5-G

700 Series C-Face Quilled Reducer
Item #101833810
  • 1 3/4" Center Distance
  • 25:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1 3/4" Center Distance
  • 25:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Output RPM @ 1750 rpm Input 70 rpm
Washdown Duty No
Fan Cooled No
Bolt Center Length x Bolt Center Width 4 3/16 in x 2 3/4 in
Ratio 25:1
Box Height 5 3/4 in
Bore Code B5
Max. Overhung Load @ 1750 rpm 500 lb/in
Bolt Center 4 3/16 in x 2 3/4 in
Frame 56C
Base to Centerline of Output Shaft 2 1/16 in
Base to Centerline of Input Shaft 3 13/16 in
HP @ RPM 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm
Box Width 5 1/32 in
Base No
Max. Thrust Load @ 1150 rpm 500 lb/in
Center Distance 1 3/4 in
Worm Position Universal
Output (Shaft or Bore) Size 7/8 in
Use With 718
Input Configuration C-Face Quilled
Input HP @ RPM 0.48 hp @ 1150 rpm, 0.76 hp @ 1750 rpm
Motor Application General Purpose
Reduction Type Single Reduction
Input (Shaft or Bore) Size 5/8 in
Lubrication None
Family Name F
Shaft Assembly Code G
Thermal Input Horsepower @ 1750 RPM N/A
Box Length 5 1/2 in
Output Torque @ RPM 500 in lb @ 1150 rpm, 574 in lb @ 1750 rpm
Max. Thrust Load @ RPM 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm
Max. Overhung Load @ RPM 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm
Frame Size 56C
Output RPM @ Input RPM 70 rpm @ 1750 rpm
Torque Out @ 1750 rpm 574 in lb
Output Configuration Left Output
Torque Out @ 1150 rpm 500 in lb
Housing Material Cast Iron
Weight 19.1 LB
EAN or UPC 781711519363
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison