Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F713-25-B5-J

700 Series C-Face Quilled Reducer
Item #101872262
  • 1.330" Center Distance
  • 25:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.330" Center Distance
  • 25:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Right Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Bolt Center 3 1/4" x 2"
Max. Thrust Load @ 1150 rpm 300 lb/in
Input Configuration C-Face Quilled
Keyway Size 3/16 x 3/32
Ratio 25:1
Frame Size 56C
Box Width 4.03 in
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Motor HP 0.33 hp
HP @ RPM 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm
Worm Position Universal
Base to Centerline of Output Shaft 1.72 in
Housing Material Cast Iron
Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Frame 56C
Base to Centerline of Input Shaft 3 1/16 in
Input HP @ RPM 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm
Motor Application General Purpose
Max. Thrust Load @ RPM 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm
Output Torque @ RPM 260 in lb @ 1150 rpm, 307 in lb @ 1750 rpm
Fan Cooled No
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Input (Shaft or Bore) Size 5/8 in
Max. Overhung Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Washdown Duty No
Base No
Box Length 4 1/4 in
Lubrication None
Reduction Type Single Reduction
Use With 713
Bolt Center Length x Bolt Center Width 3 1/4 in x 2 in
Output Configuration Right Output
Output RPM @ 1750 rpm Input 70 rpm
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Torque Out @ 1750 rpm 307 in lb
Bore Code B5
Output (Shaft or Bore) Size 5/8 in
Torque Out @ 1150 rpm 260 in lb
Thermal Input Horsepower @ 1750 RPM N/A
Shaft Assembly Code J
Center Distance 1.33 in
Output RPM @ Input RPM 70 rpm @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Max. Overhung Load @ 1750 rpm 200 lb/in
Box Height 4 21/32 in
Max. Input HP @ 100 rpm 0.031 hp
Family Name F
Weight 13.1 LB
EAN or UPC 781711518847
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison