Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F710-60-B5-H

700 Series C-Face Quilled Reducer
Item #101853265
  • 1" Center Distance
  • 60:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left & Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1" Center Distance
  • 60:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left & Right Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Do not restrict the inlet flow
Max. Overhung Load @ 1750 rpm 150 lb/in
Torque Out @ 1150 rpm 105 in lb
Output Torque @ RPM 105 in lb @ 1150 rpm, 144 in lb @ 1750 rpm
Washdown Duty No
Housing Material Cast Iron
Bore Code B5
Bolt Center Length x Bolt Center Width 2 5/8 in x 1 11/16 in
Frame Size 56C
Box Width 3 11/32 in
Base No
Box Length 4 1/4 in
Lubrication None
Shaft Assembly Code H
Base to Centerline of Input Shaft 2 5/16 in
Output Configuration Left & Right Output
Output RPM @ Input RPM 29 rpm @ 1750 rpm
Base to Shaft Center Height w/High Vert. Base Kit 2.94 in
HP @ RPM 0.08333333 hp @ 1800 rpm
Input Configuration C-Face Quilled
Frame 56C
Use With 710
Max. Overhung Load @ RPM 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm
Bolt Center 2 5/8" x 1 11/16"
Base to Centerline of Output Shaft 1.31 in
Output RPM @ 1750 rpm Input 29.2 rpm
Max. Thrust Load @ 1150 rpm 200 lb/in
Center Distance 1 in
Input (Shaft or Bore) Size 5/8 in
Fan Cooled No
Bolt Centers w/ Vertical Base Kits (in) 5.13 x 2.31
Output (Shaft or Bore) Size 1/2 in
Thermal Input Horsepower @ 1750 RPM N/A
Base to Shaft Center Height w/Std. Base Kit 2 3/4 in
Input HP @ RPM 0.065 hp @ 1150 rpm, 0.12 hp @ 1750 rpm
Max. Thrust Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Torque Out @ 1750 rpm 144 in lb
Max. Input HP @ 100 rpm 0.008 hp
Ratio 60:1
Bolt Centers w/ Std. Base Kit (in) 3 3/4 x 2 7/8
Motor Application General Purpose
Box Height 3 5/8 in
Reduction Type Single Reduction
Worm Position Universal
Family Name F
Weight 10.1 LB
EAN or UPC 781711439463
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison