Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F710-15-B5-G

700 Series C-Face Quilled Reducer
Item #101559956
  • 1" Center Distance
  • 15:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1" Center Distance
  • 15:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Thermal Input Horsepower @ 1750 RPM N/A
Max. Overhung Load @ 1750 rpm 150 lb/in
Motor Application General Purpose
Input (Shaft or Bore) Size 5/8 in
Max. Overhung Load @ RPM 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm
Fan Cooled No
Base to Shaft Center Height w/High Vert. Base Kit 2.94 in
Lubrication None
Motor HP 1/4 hp
Output (Shaft or Bore) Size 1/2 in
Use With 710
Output Torque @ RPM 125 in lb @ 1150 rpm, 146 in lb @ 1750 rpm
Bolt Centers w/ Vertical Base Kits (in) 5.13 x 2.31
Output Configuration Left Output
Torque Out @ 1750 rpm 146 in lb
Worm Position Universal
Center Distance 1 in
Max. Input HP @ 100 rpm 0.023 hp
HP @ RPM 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm
Base to Centerline of Output Shaft 1.31 in
Torque Out @ 1150 rpm 125 in lb
Output RPM @ Input RPM 117 rpm @ 1750 rpm
Housing Material Cast Iron
Output RPM @ 1750 rpm Input 117 rpm
Keyway Size 3/16 x 3/32
Bore Code B5
Frame Size 56C
Box Length 4 1/4 in
Base to Shaft Center Height w/Std. Base Kit 2 3/4 in
Washdown Duty No
Bolt Center Length x Bolt Center Width 2 5/8 in x 1 11/16 in
Bolt Centers w/ Std. Base Kit (in) 3 3/4 x 2 7/8
Family Name F
Max. Thrust Load @ 1150 rpm 200 lb/in
Base to Centerline of Input Shaft 2 5/16 in
Shaft Assembly Code G
Reduction Type Single Reduction
Frame 56C
Ratio 15:1
Input HP @ RPM 0.17 hp @ 1150 rpm, 0.33 hp @ 1750 rpm
Box Width 3 11/32 in
Box Height 3 5/8 in
Max. Thrust Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Base No
Input Configuration C-Face Quilled
Bolt Center 2 5/8" x 1 11/16"
Weight 10.1 LB
EAN or UPC 781711598320
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison