Skip to content Skip to navigation menu
700 Series Standard Reducer

752-40F-G

700 Series Standard Reducer
Item #101870133
  • 5 5/32" Center Distance
  • 40:1 Ratio
  • w/Fan
  • Shaft Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series Standard Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 5 5/32" Center Distance
  • 40:1 Ratio
  • w/Fan
  • Shaft Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Max. Thrust Load @ RPM 1900 lb/in @ 1150 rpm, 1900 lb/in @ 1750 rpm
Bolt Centers w/ Vertical Base Kits (in) 18.00 x 10.00
Washdown Duty No
Worm Position Universal
Frame Size Shaft Input, Not a C-Face
Output RPM @ Input RPM 44 rpm @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 14 1/8 x 8 3/8
Output RPM @ 1750 rpm Input 43.75 rpm
Center Distance 5.15625 in
Max. Input HP @ 100 rpm 0.71 hp
Family Name Std Unit
Base to Shaft Center Height w/Low Vert. Base Kit 6.38 in
Max. Overhung Load @ 1750 rpm 2200 lb/in
Torque Out @ 1750 rpm 8178 in lb
Fan Cooled Yes
Shaft Assembly Code G
Base to Shaft Center Height w/High Vert. Base Kit 8.63 in
Base to Shaft Center Height w/Std. Base Kit 6.44 in
Box Width 7 3/8 in
Motor Application General Purpose
Box Length 13 1/8 in
Output (Shaft or Bore) Size 2 in
Base to Centerline of Output Shaft 5.3125 in
HP @ RPM 5 hp @ 1800 rpm
Input Configuration Shaft Input
Input (Shaft or Bore) Size 1 1/4 in
Base to Centerline of Input Shaft 10.4688 in
Reduction Type Single Reduction
Output Configuration Left Output
Max. Overhung Load @ RPM 2200 lb/in @ 1150 rpm, 2200 lb/in @ 1750 rpm
Frame N/A
Housing Material Cast Iron
Output Torque @ RPM 8178 in lb @ 1750 rpm, 8400 in lb @ 1150 rpm
Max. Thrust Load @ 1150 rpm 1900 lb/in
Bolt Center 14 1/8" x 8 3/8"
Thermal Input Horsepower @ 1750 RPM N/A
Box Height 13 3/4 in
Torque Out @ 1150 rpm 8400 in lb
Ratio 40:1
Input HP @ RPM 4.68 hp @ 1150 rpm, 7 hp @ 1750 rpm
Lubrication None
Weight 201.1 LB
EAN or UPC 781711496381
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison