Find a Service Center
- 3" Center Distance
- 15:1 Ratio
- Shaft Input
- Right Output
- No Lubricant
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Danger tags indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury. The signal word Danger is to be limited to the most extreme situations. Danger tags should not be used for property damage hazards unless
- Note: A tag shall not be used in place of a permanent sign or label intended for hazards in normal use, operation or maintenance.
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Box Length | 8 45/64 in |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Input Configuration | Shaft Input |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Ratio | 15:1 |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Family Name | Std Unit |
| Housing Material | Cast Iron |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Use With | 730 |
| Motor Application | General Purpose |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| Frame | N/A |
| Output Configuration | Right Output |
| Washdown Duty | No |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Height | 8 7/8 in |
| Frame Size | Shaft Input, Not a C-Face |
| Center Distance | 3 in |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Torque Out @ 1750 rpm | 1969 in lb |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Torque Out @ 1150 rpm | 2425 in lb |
| HP @ RPM | 3 hp @ 1800 rpm |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Worm Position | Universal |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Bolt Center | 7 in x 4 in |
| Box Width | 6 49/64 in |
| Reduction Type | Single Reduction |
| Lubrication | None |
| Weight | 55.1 LB |
| EAN or UPC | 781711648315 |
