
- 1.540" Center Distance
- 10:1 Ratio
- Shaft Input
- Left & Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Always follow lock out and tag out procedures when working on conveyor systems.
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardianâ„¢ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
Motor Application | General Purpose |
Output RPM @ 1750 rpm Input | 175 rpm |
Thermal Input Horsepower @ 1750 RPM | N/A |
Worm Position | Universal |
Max. Thrust Load @ 1150 rpm | 400 lb/in |
Frame Size | Shaft Input, Not a C-Face |
Center Distance | 1.54 in |
Bolt Center | 5 1/4 in x 4 5/16 in |
Max. Input HP @ 100 rpm | 0.086 hp |
Lubrication | None |
Ratio | 10:1 |
Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
Input HP @ RPM | 0.73 hp @ 1150 rpm, 1.2 hp @ 1750 rpm |
Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
Output Configuration | Left & Right Output |
Torque Out @ 1750 rpm | 397 in lb |
Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
Use With | 715 |
Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
Bolt Center Length x Bolt Center Width | 5 1/4 in x 4 5/16 in |
Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
Max. Overhung Load @ 1750 rpm | 300 lb/in |
Reduction Type | Single Reduction |
Washdown Duty | No |
Frame | N/A |
Base to Centerline of Input Shaft | 3 29/64 in |
Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
Box Width | 3 11/16 in |
Fan Cooled | No |
Family Name | Std Unit |
Output (Shaft or Bore) Size | 3/4 in |
Housing Material | Cast Iron |
Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
Input (Shaft or Bore) Size | 5/8 in |
HP @ RPM | 1 hp @ 1800 rpm |
Box Length | 5 1/8 in |
Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
Base to Centerline of Output Shaft | 1 29/32 in |
Shaft Assembly Code | H |
Output Torque @ RPM | 350 in lb @ 1150 rpm, 397 in lb @ 1750 rpm |
Input Configuration | Shaft Input |
Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
Box Height | 5 3/8 in |
Torque Out @ 1150 rpm | 350 in lb |
Weight | 17.1 LB |
EAN or UPC | 781711516348 |
