Find a Service Center
- 1" Center Distance
- 10:1 Ratio
- Shaft Input
- Left & Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Never operate, adjust, or install equipment on a moving conveyor.
- Always follow lock out and tag out procedures when working on conveyor systems.
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardianâ„¢ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Family Name | Std Unit |
| Frame | N/A |
| Center Distance | 1 in |
| Motor Application | General Purpose |
| Output Configuration | Left & Right Output |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Input Configuration | Shaft Input |
| Base to Centerline of Output Shaft | 1 5/16 in |
| Torque Out @ 1750 rpm | 138 in lb |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Bolt Center | 3 3/4" x 2 7/8" |
| Input HP @ RPM | 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Input (Shaft or Bore) Size | 3/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Frame Size | Shaft Input, Not a C-Face |
| Output Torque @ RPM | 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Shaft Assembly Code | H |
| Torque Out @ 1150 rpm | 118 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Reduction Type | Single Reduction |
| Bolt Center Length x Bolt Center Width | 3 3/4 in x 2 7/8 in |
| Washdown Duty | No |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Box Width | 2 1/2 in |
| Lubrication | None |
| Ratio | 10:1 |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Housing Material | Cast Iron |
| Worm Position | Universal |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Box Length | 3 1/4 in |
| Box Height | 3 5/8 in |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Use With | 710 |
| Fan Cooled | No |
| Weight | 6.1 LB |
| EAN or UPC | 781711515891 |
