Skip to content Skip to navigation menu
700 Series Standard Reducer

710-10-G

700 Series Standard Reducer
Item #101808987
  • 1" Center Distance
  • 10:1 Ratio
  • Shaft Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series Standard Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1" Center Distance
  • 10:1 Ratio
  • Shaft Input
  • Left Output
  • Universal Worm Position

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Max. Overhung Load @ RPM 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm
Input HP @ RPM 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm
Lubrication None
Shaft Assembly Code G
Ratio 10:1
Center Distance 1 in
Base to Shaft Center Height w/Std. Base Kit 2 3/4 in
Bolt Centers w/ Vertical Base Kits (in) 5.13 x 2.31
Box Height 3 5/8 in
Output RPM @ Input RPM 175 rpm @ 1750 rpm
Washdown Duty No
Max. Thrust Load @ 1150 rpm 200 lb/in
Base to Centerline of Output Shaft 1.3125 in
Input (Shaft or Bore) Size 3/8 in
Max. Input HP @ 100 rpm 0.03 hp
Bolt Centers w/ Std. Base Kit (in) 3 3/4 x 2 7/8
Use With 710
Bolt Center 3 3/4" x 2 7/8"
Base to Shaft Center Height w/High Vert. Base Kit 2.94 in
Thermal Input Horsepower @ 1750 RPM N/A
Max. Overhung Load @ 1750 rpm 150 lb/in
Frame Size Shaft Input, Not a C-Face
Box Length 3 1/4 in
Torque Out @ 1750 rpm 138 in lb
Frame N/A
Worm Position Universal
Max. Thrust Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Torque Out @ 1150 rpm 118 in lb
Output (Shaft or Bore) Size 1/2 in
Motor Application General Purpose
HP @ RPM 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm
Housing Material Cast Iron
Family Name Std Unit
Reduction Type Single Reduction
Output Configuration Left Output
Box Width 2 1/2 in
Base to Centerline of Input Shaft 2.3125 in
Input Configuration Shaft Input
Output Torque @ RPM 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm
Fan Cooled No
Output RPM @ 1750 rpm Input 175 rpm
Weight 6.1 LB
EAN or UPC 781711515884
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison