Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5314MG

5300-M Medium Series Bearing
Item #100760750
  • 70 mm ID x 150 mm OD x 2 1/2" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 70 mm ID x 150 mm OD x 2 1/2" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Width 63.500 mm
Seal Material None
Series 5300M
Lubricant Oil Preservative
Precision Level Standard (ABEC 1)
Seal Type Unsealed
Snap Ring With Snap Ring
Flush Ground No
No. in Set Single Bearing
Precision Standard
Ball Material Steel
Contact Angle 30°
Locating Snap Ring Fitted
Origin Double Row Deep Groove
Limiting Speed - Sealed 2800 rpm
O.D. Type Straight w/ Snap Ring
Bore Type Round Bore
Inch/Metric Metric Bore
Locking Device No Locking Device
icNumber 7704625
Material Steel
Preload Level None
Radial Internal Clearance Normal
Limiting Speed - Grease 2800 rpm
Static Load Rating 186 kN
Cage Material Steel
Fillet Radius 2 mm
Dynamic Load Rating 38700 lbf
Static Load Rating [Max] 41800 lbf
Enclosure Open
Outer Ring Width 2 1/2 in
Inner Ring Width 2 1/2 in
Radial Internal Clearance Specification Normal Clearance
O.D. 150 mm
Bearing Type Angular Contact
Capacity Maximum Capacity
I.D. 70 mm
Limiting Speed - Oil 3800 rpm
Cage Type Metal
Temperature Range [Max] 450 °F
Rows of Balls Double
Weight 10.472 LB
EAN or UPC 97741015806
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison