Skip to content Skip to navigation menu
Double Row Cylindrical Bore Angular Contact Ball Bearing

5207CG

Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760636
  • 35 mm ID x 72 mm OD x 1 1/16" Wide
  • Open
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
Double Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 35 mm ID x 72 mm OD x 1 1/16" Wide
  • Open
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Outer Ring Width 1 1/16 in
Limiting Speed - Grease 6000 rpm
Origin Double Row Deep Groove
Preload Level None
Radial Internal Clearance Specification Normal Clearance
Locking Device No Locking Device
I.D. 35 mm
Bearing Type Angular Contact
Flush Ground No
Material Steel
Bore Type Round Bore
Inner Ring Width 1 1/16 in
Seal Material None
Dynamic Load Rating 8480 lbf
O.D. Type Straight w/ Snap Ring
Cage Material Steel
Capacity Standard Capacity
Precision Standard
Contact Angle 30°
Limiting Speed - Sealed 6000 rpm
Seal Type Unsealed
No. in Set Single Bearing
Ball Material Steel
Radial Internal Clearance Normal
Limiting Speed - Oil 8000 rpm
Series 5200C
Static Load Rating [Max] 6180 lbf
Precision Level Standard (ABEC 1)
Fillet Radius 1 mm
Enclosure Open
Cage Type Metal
Temperature Range [Max] 450 °F
Snap Ring With Snap Ring
Locating Snap Ring Fitted
icNumber 7704819
Inch/Metric Metric Bore
O.D. 72 mm
Width 26.988 mm
Static Load Rating 27.5 kN
Lubricant Oil Preservative
Rows of Balls Double
Weight 1.051 LB
EAN or UPC 97741011563
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison