Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Reed, hall effect and inductive proximity sensors
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Positions | 2 Position |
| Stroke | 9 in |
| Series | HBT |
| Cylinder Seal Material | Buna-N |
| Cylinder Bore Size | 2.5 in |
| Proximity Sensor | No Proximity Sensor |
| Support Rod Diameter | 30 mm |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Pressure [Max] | 150 psi |
| Support Rod Material | Steel |
| Port Location | Standard (Position 1) |
| Port Size | 3/8 |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Flow Controls | w/o Flow Controls |
| Temperature Range [Max] | 165 °F |
| Bearing Type | Composite Bearing |
| Weight per Inch | 0.85 lb |
| Proximity Sensor Code | None |
| Base Wt. | 24.45 lb |
| Bumpers - Slide | Bumpers (Both Ends) |
| Shock Absorbers - Slide | No Shock Absorber |
| Temperature Range [Min] | 0 °F |
| Intermediate Stroke | N/A |
| Port Type | NPTF |
| Cushions - Slide | No Cushions |
| Slide Orientation | Right Hand (Standard) |
| Slide Configuration Option Code | B |
| Slide Type | Thrust Slide |
| Weight | 32.1 LB |
