Find a Service Center
Alternate Products
MRC Bearing Service
8222
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100757230
- Single Row Angular Contact Bearing, 110 mm ID x 200 mm OD x 38 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Limiting Speed - Oil | 3600 rpm |
| I.D. | 4.33 in, 110 mm |
| Radial Internal Clearance | Normal |
| Seal Type | Unsealed |
| Flush Ground | Yes |
| No. in Set | Duplex Set |
| Radial Internal Clearance Specification | Normal Clearance |
| Origin | Single Row Angular Contact |
| Limiting Speed - Grease | 2600 rpm |
| Static Load Rating | 156 kN |
| Precision Level | Standard (ABEC 1) |
| Fillet Radius | 2 mm |
| Lubricant | Oil Preservative |
| Ball Material | Steel |
| O.D. | 7.87 in, 200 mm |
| Static Load Rating [Max] | 35100 lbf |
| Inner Ring Width | 1.5 in, 38 mm |
| Width | 1.5 in, 38 mm |
| Rows of Balls | Single |
| Bore Type | Cylindrical |
| Enclosure | Open |
| Precision | Standard |
| Outer Ring Width | 1.5 in, 38 mm |
| Temperature Range [Max] | 450 °F |
| Internal Design | Universal Mounting |
| Seal Material | None |
| icNumber | 7699063 |
| Series | 7200P |
| Snap Ring | No Snap Ring |
| Inch/Metric | Metric |
| Material | Bearing Steel |
| Cage Type | Metal |
| Cage Material | Brass |
| Bearing Type | Unmounted, Angular Contact |
| Contact Angle | 40 Degree |
| Dynamic Load Rating | 153 kN |
| O.D. Type | Cylindrical |
| Capacity | Standard Capacity |
| Preload Level | Light |
| Locking Device | No Locking Device |
| Weight | 10.6 LB |
| EAN or UPC | 97741017039 |
