Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 10" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Cushions - Slide | No Cushions |
| Port Location | Standard (Position 1) |
| Slide Orientation | Right Hand (Standard) |
| Bumpers - Slide | No Bumpers |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Proximity Sensor | No Proximity Sensor |
| Port Type | NPTF |
| Bearing Type | Composite Bearing |
| Cylinder Seal Material | Buna-N |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Intermediate Stroke | N/A |
| Support Rod Material | Steel |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Positions | 2 Position |
| Support Rod Diameter | 20 mm |
| Cylinder Bore Size | 1.5 in |
| Series | HBT |
| Slide Type | Thrust Slide |
| Temperature Range [Max] | 165 °F |
| Pressure [Max] | 750 psi |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Stroke | 10 in |
| Slide Configuration Option Code | A |
| Proximity Sensor Code | None |
| Temperature Range [Min] | 0 °F |
| Port Size | 1/4 |
| Flow Controls | w/o Flow Controls |
| Base Wt. | 8.86 lb |
| Weight per Inch | 0.48 lb |
| Weight | 13.66 LB |
