Find a Service Center
- D05 Double Solenoid Operated Valve
- 48 VDC
- Lead Wires w/o Terminal Box
- Flying Leads
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Indicator Lights | No |
| Surge Suppressor/Damper | None |
| Reducer Module | N/A |
| Solenoid | Double |
| Port T Pressure Rating | 1000 psi |
| Electrical Options Code | None |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Rated Flow [Max] | 25 gal/min |
| Pressure [Max] | 3600 psi |
| AC/DC | DC |
| Pilot Valve Type | N/A |
| Design No. | 60 |
| Overrides | No Overrides |
| Pressure Port Check Valve Pressure | N/A |
| Spool Code | 6 |
| NFPA Size | D05 |
| Mechanical Options | None |
| Response Type | Standard Response |
| Electrical Options | None |
| Pilot/Drain | None |
| Operation | Solenoid Operated |
| Crossover | P Blocked, A or B to T |
| Actuator Type | Solenoid |
| Mechanical Options Code | None |
| Seal Material | Buna-N |
| Function | 3-Position Spring Centered |
| Spool Spring Arrangement Code | C |
| Center Position | P Blocked, A & B to T |
| Coil Type Code | None |
| Coil Rating Code | J |
| Flow Direction Code | 4 |
| Valve Type | Standard-Duty |
| Voltage & Frequency | 48 VDC |
| Coil Type | Flying Leads |
| Port Restrictor Plugs | None |
| Cycle Rate [Max] | N/A |
| Weight | 10.0 LB |
