Skip to content Skip to navigation menu
Boston GearHF713-15-B5-H-P10

HF713-15-B5-H-P10

700 Series Bostmount C-Face Quilled Reducer
Item #101793751
  • 1.330" Center Distance
  • 15:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Hollow Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
Boston GearHF713-15-B5-H-P10
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.330" Center Distance
  • 15:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Hollow Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Bolt Center Length x Bolt Center Width 3 1/4 in x 2 in
Max. Overhung Load @ 1750 rpm 200 lb/in
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Input (Shaft or Bore) Size 5/8 in
Washdown Duty No
Output (Shaft or Bore) Size 5/8 in
Torque Out @ 1750 rpm 305 in lb
Box Length 4 1/4 in
Motor HP 1/2 hp
Box Height 4 21/32 in
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Frame Size 56C
Input HP @ RPM 0.37 hp @ 1150 rpm, 0.66 hp @ 1750 rpm
Max. Overhung Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Family Name HF
Fan Cooled No
Use With 713
Keyway Size 3/16 x 3/32
Input Configuration C-Face Quilled
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Output Configuration Hollow Output
Output RPM @ 1750 rpm Input 117 rpm
Motor Application General Purpose
Output RPM @ Input RPM 117 rpm @ 1750 rpm
Center Distance 1.33 in
Max. Input HP @ 100 rpm 0.049 hp
Frame 56C
Housing Material Cast Iron
Thermal Input Horsepower @ 1750 RPM N/A
Bolt Center 3 1/4" x 2"
Base to Centerline of Output Shaft 1 23/32 in
Base to Centerline of Input Shaft 3 1/16 in
Bore Code B5
Shaft Assembly Code H
Worm Position Universal
Box Width 3 41/64 in
Reduction Type Single Reduction
Torque Out @ 1150 rpm 262 in lb
HP @ RPM 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm
Output Torque @ RPM 262 in lb @ 1150 rpm, 305 in lb @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Ratio 15:1
Lubrication None
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Max. Thrust Load @ 1150 rpm 300 lb/in
Max. Thrust Load @ RPM 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm
Weight 13.1 LB
EAN or UPC 781711630037
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison