Find a Service Center
- 1" Center Distance
- 10:1 Ratio
- Shaft Input
- Left & Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Never operate, adjust, or install equipment on a moving conveyor.
- Always follow lock out and tag out procedures when working on conveyor systems.
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardianâ„¢ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Torque Out @ 1150 rpm | 118 in lb |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Torque @ RPM | 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Input HP @ RPM | 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm |
| Frame | N/A |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Reduction Type | Single Reduction |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Housing Material | Cast Iron |
| Washdown Duty | No |
| Box Height | 3 5/8 in |
| Base to Centerline of Output Shaft | 1 5/16 in |
| Fan Cooled | No |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input (Shaft or Bore) Size | 3/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Use With | 710 |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Torque Out @ 1750 rpm | 138 in lb |
| Box Length | 3 1/4 in |
| Lubrication | None |
| Bolt Center Length x Bolt Center Width | 3 3/4 in x 2 7/8 in |
| Worm Position | Universal |
| Shaft Assembly Code | H |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Family Name | Std Unit |
| Bolt Center | 3 3/4" x 2 7/8" |
| Output Configuration | Left & Right Output |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Input Configuration | Shaft Input |
| Frame Size | Shaft Input, Not a C-Face |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Ratio | 10:1 |
| Box Width | 2 1/2 in |
| Center Distance | 1 in |
| Motor Application | General Purpose |
| Weight | 6.1 LB |
| EAN or UPC | 781711515891 |
