Find a Service Center
- .94" Center Distance
- 20:1 Ratio
- Shaft Input
- Left Output
- Bottom Worm Position
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Output Torque @ RPM | 43 in lb @ 1750 rpm |
| Worm Position | Bottom |
| Reduction Type | Single Reduction |
| Torque Out @ 1150 rpm | N/A |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Fan Cooled | No |
| Input Configuration | Shaft Input |
| Max. Thrust Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Box Length | 2 3/4 in |
| Input (Shaft or Bore) Size | 5/16 in |
| Lubrication | Mobil SHC634 Synthetic |
| Output (Shaft or Bore) Size | 1/2 in |
| Torque Out @ 1750 rpm | 43 in lb |
| Output Configuration | Left Output |
| Bolt Center | 2 3/4" x 2 3/4" |
| Input HP @ RPM | 0.17 hp @ 1750 rpm |
| Center Distance | 0.94 in |
| Frame Size | Shaft Input, Not a C-Face |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Box Height | 3 15/32 in |
| Housing Material | Cast Iron |
| HP @ RPM | 0.1666667 hp @ 1800 rpm |
| Shaft Assembly Code | J |
| Motor Application | General Purpose |
| Box Width | 2 3/4 in |
| Bolt Center Length x Bolt Center Width | 2 3/4 in x 2 3/4 in |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Washdown Duty | No |
| Max. Overhung Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Family Name | Std Unit |
| Frame | N/A |
| Use With | 309 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Installed Options | Horizontal Base |
| Base to Centerline of Input Shaft | 1 9/16 in |
| Ratio | 20:1 |
| Weight | 10.1 LB |
| EAN or UPC | 781711455210 |
