Find a Service Center
- 1.330" Center Distance
- 30:1 Ratio
- Shaft Input
- Left Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardianâ„¢ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Reduction Type | Single Reduction |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Input Configuration | Shaft Input |
| Input HP @ RPM | 0.21 hp @ 1150 rpm, 0.39 hp @ 1750 rpm |
| Torque Out @ 1150 rpm | 270 in lb |
| Box Height | 4 21/32 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Frame | N/A |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Washdown Duty | No |
| Output (Shaft or Bore) Size | 5/8 in |
| Frame Size | Shaft Input, Not a C-Face |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Base to Centerline of Output Shaft | 1 23/32 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Input (Shaft or Bore) Size | 1/2 in |
| Output Configuration | Left Output |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.029 hp |
| Lubrication | None |
| Worm Position | Universal |
| Family Name | Std Unit |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Fan Cooled | No |
| Output Torque @ RPM | 270 in lb @ 1150 rpm, 311 in lb @ 1750 rpm |
| Center Distance | 1.33 in |
| Box Width | 2 7/8 in |
| Housing Material | Cast Iron |
| Bolt Center Length x Bolt Center Width | 4 3/8 in x 3 5/16 in |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Bolt Center | 4 3/8 in x 3 5/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Box Length | 4 1/4 in |
| Base to Centerline of Input Shaft | 3 3/64 in |
| Shaft Assembly Code | G |
| Use With | 713 |
| Torque Out @ 1750 rpm | 311 in lb |
| Ratio | 30:1 |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Weight | 11.1 LB |
| EAN or UPC | 781711516218 |
