Devcon
11420 | Wear-Resistant Putty (WR-2)
- 3 lb Kit
- Smooth, Non-Rusting, All-Purpose Epoxy Compound for Repairs Requiring Smooht, High-Slip Finishes, Such As Lathe Beds
Devcon
10240 | Plastic Steel® 5 Minute® Putty (SF)
- 1 lb Kit
- Fast-Curing Steel-Filled Epoxy for Emergency Repairs at Temperatures As Low As 40 °F
Devcon
11700 | Ceramic Repair Putty
- 3 lb Container
- Trowelable Alumina-Filled Epoxy Compound for Rebuilding, Smoothing, and Protecting Processing Equipment Exposed to Corrosion, Erosion, Cavitation, Chemicals, and Acids
- Service Temperatures to 350 °F
Devcon
11760
-
No Air Shipping
-
mac
11760 | Brushable Ceramic Epoxy
- 2 lb Kit
- Red
- Alumina-Filled, Brushable Epoxy Compound Provides a Smooth, Protective Barrier Against Wear, Abrasion, Corrosion, Erosion, and Chemical Attack
- Service Temperature to 350 °F
Devcon
11765
-
No Air Shipping
-
mac
11765 | Brushable Ceramic Epoxy
- 2 lb Kit
- Blue
- Alumina-Filled, Brushable Epoxy Compound Provides a Smooth, Protective Barrier Against Wear, Abrasion, Corrosion, Erosion, and Chemical Attack
- Service Temperature to 350 °F
Devcon
10110 | Plastic Steel® Putty (A)
- 1 lb Kit
- the Original Metal-Filled Epoxy Putty
- Used for Hundreds of Routine Maintenance, Production, and Tooling Applications
- Can Be Drilled, Tapped, Machined or Painted
Devcon
13110
-
No Air Shipping
-
mac
13110 | Floor Patchâ„¢ FC (Fast Cure)
- 10 lb Kit
- With This Fast-Curing Version Of Floor Patch, Repairs Areas Can Be Back in Service in 3 Hours
Devcon
11410 | Wear-Resistant Putty (WR-2)
- 1 lb Kit
- Smooth, Non-Rusting, All-Purpose Epoxy Compound for Repairs Requiring Smooth, High-Slip Finishes, Such As Lathe Beds
Devcon
11801
-
No Air Shipping
-
mac
11801 | Underwater Repair Putty (UW)
- 1 lb
- Water Resistant Putty for Repairing, Patching, and Rebuilding Equipment in Underwater or Habitually Wet Environments
- Bonds to Steel, Iron, Aluminum, Brass, Bronze, Concrete, Wood, and Plastics
- Cures at Temperatures Down to 40 °F
Devcon
11490 | Wear Guardâ„¢ High Load Abrasion Resistant Epoxy
- 30 lb Pail
- Alumina Ceramic Bead-Filled Epoxy System w/Outstanding Abrasion Resistance for Severe Serviced Conditions w/Particulate Greater Than 1/8"
- Service Temperature to 300 °F
Devcon
10710
-
No Air Shipping
-
mac
10710 | Aluminum Liquid (F-2)
- 1 lb Kit
- Use to Make Molds, Patterns, and Holding Fixtures
- Can Be Machined, Drilled, or Tapped
Devcon
12560 | Epoxy Concrete Sealer
- 2 gal Pail
- Chemical Resistant Coating
- Self Leveling
- Can Be Applied at Temperatures as Low as 40°F
- Apply w/Brush, Roller or Squeegee
Devcon
10780 | FasMetalâ„¢ Putty
- 3/4 lb Kit
- High Performance, Alumina-Filled Epoxy for Making Quick, Permanent Emergency Repairs to Pipes, Chutes, Tanks, and Bearing Housings
- Machinable
- Can Be Applied At Temperatures As Low As 40 °F
Devcon
10120
-
No Air Shipping
-
mac
10120 | Plastic Steel® Putty (A)
- 4 lb Kit
- The Original Metal-Filled Epoxy Putty
- Used For Hundreds of Routine Maintenance, Production, and Tooling Applications
- Can Be Drilled, Tapped, Machined or Painted
Find a Service Center
